Counterpoise sub assemblies To fabricate and install a counterpoise, the following sub assemblies are required

Mounting platform for central antenna Walkway Trap door Truss Radial angles Vertical supports Wire mesh Ladder (for climbing over the counterpoise for maintenance) Platform for side Band antenna

Note:  Counterpoise system in configurations of 30 ft / 60 ft and other sizes can be fabricated and supplied as per customer specific requirements.

Component DRG Number Quantity (in number) Channel Perimeter – 21 R 10021 12 Channel Perimeter – 23 R 10023 12 Angle Perimeter – 22 R 10022 12 Angle Perimeter – 30 R 10030 24 Angle Perimeter – 40 R 10040 24 Angle Perimeter – 50 R 10050 24 Mesh Support Radial – 8R 10121/1 12 Mesh Support Radial – 15R 10121/2 12 Mesh Support Radial – 22R 10121 12 Mesh Support Radial – 30R 10131 24 Mesh Support Radial – 40R 10141 48 Mesh Support Radial – 50R 10151 48 Long Truss Radial – 22R 10122 12 Short Truss Radial – 30R 10130 12 Medium Truss Radial – 40R 10140 24 Medium Truss Radial – 50R 10150 24 Vertical support – 22R S.A.10221 12 Vertical support – 40R S.A.10240 24 Rest plate for Channel S.A.10400 12 Platform for carrier antenna 10227 1 Mounting plate for side band antenna 10228 48 Walk way fitted to long truss 10907 1 Ladder 10908 1 Wire mesh panels – 16 sizes 10901-10916 180 ‘J’ bolts for truss (small size) 10229 324 sets ‘J’ bolts for perimeter (big size) 10230 336 sets Flat clamp 10232 120 22R foundation marking template – T1 10601 1 set 40R foundation marking template – T2 10602 1 set Base nails 8 Hardware  12 mm x 40 mm long hex bolts with nuts and washers 1600 sets  16 mm x 150 mm long hex bolts with nuts and washers 12 sets Anchor bolts for foundation with washers and nuts) 144 sets ‘L’ bolts for side band antenna 192 sets Tools Double ended spanner 2 Adjustable screw spanner 1 Hammer (2 Kilos weight) 1

Counterpoise  Features, Applications
Counterpoise sub assemblies
Counterpoise Installation, Warranties, Maintenance

Enquire for Counterpoise